Sena Rulman | SKF İzmir Bayi | İzmir Rulman

%60 You can avoid premature bearing damage.

ramazan — Mon, 05 Aug 2019 12:52:42 +0000

%60 You can avoid premature bearing damage.

%16

Bad Assembly

Approximately the reason for sixteen percent of earlier bearing damage is improper assembly for bearing and be unaware of true assembly appliances.True and proper assembly and dismantling is done depending on the application with mechanic, hydraulic or thermal methods.SKF with wide knowledge,practicing at maintenance engineering ,presents appliances and equipments at wide range of products which do these processes easier,faster and more cost effective .Professional assembly with using special technics and appliances at increasing machine operating time is too important step.

%36

Insufficient Lubrication

Normally,bearings with gasket cover do not need lubrication forever.Approximately the reason for thirty six percent of earlier bearing damage is wrong lubricator and insufficient lubrication.Bearing with lubrication problem is damaged long before than calculated normal life.Bearing which are the most difficult machine elements to reach generally,neglected lubrication process causes further problem.In case of lubrication with hand is not practicable,SKF fully automatic lubrication systems can be used for optimum lubrication.Effective lubrication with using suggested SKF grease,appliances and methods decreases machine stop time highly.

%14

Pollution

Bearing is also itself and lubricator is machine element,not possible to work efficiently without protection against pollution. Rate of bearings with gasket cover and grease is very small among all bearings.The reason for fourteen percent of earlier bearing damage is problems about pollution.SKF has unrivaled bearing production and design ability.SKF also can present special impermeability solutions for most difficult working conditions.

%34

Fatigue

In case of machine overlading, Earlier bearing damage and their results appears for approximately thirty four percent uncared or neglected bearings.Neglected or overloaded bearing gives an earlier warning signal to protect sudden ve unexpected bearing damage.SKF bearing family about this subject contains handheld devices which provide monitoring important working parameters continously.

The post %60 You can avoid premature bearing damage. first appeared on Sena Rulman | SKF İzmir Bayi | İzmir Rulman.

SKF Bearing Life Cycle

ramazan — Mon, 05 Aug 2019 12:39:55 +0000

You should help your bearings to reach maximum lifespan.

There is calculated lifetime for each bearing.Additionally,researches indicate that each bearing does not reach this lifetime.The most important stages which have basic effect on bearing lifetime,can be seen easily during life cycle of one bearing.These stages are assembly and pre-lubrication,adjustment,re-lubrication, status monitoring systems and disassembly.
These stages which are at bearing cycle,are too important for supplying maximum bearing lifetime.You can increasing bearing life with practicing true maintenance plan and using true assembly and disassembly appliances.You can also increase your workshop’s efficiency and productivity.

Assembly and Lubrication

This subject contains mechanic assembly appliances,induction heaters and hydraulic equipments.Assembly is the most critical stage of bearing life cycle.

If bearing is not assembled properly with true method and appliances,bearing life will be decreased naturally.Lubrication is also important stage of assembly process.

Choosing proper grease for optimum performance is critical.In addition to these,using true grease amount and proper lubrication method will affect bearing life positively.

Laser Axis Adjusment

This subject contains shaft and pulley axis adjustment systems

For example;like connecting enine to pump,After assembly for bearing,necessary axial adjustment processes should be made at any practicing.If axial adjustments are not done correctly,result of improper adjustment,bearing can suffer additional loads,vibration and friction are increased.These events ,accelerating fatique cycle,decrease life of bearing and other machine elements. Additionally,increasing vibration and friction energy consumption is at significant rate,cause erarlier bering damage.

Re-Lubrication

It contains bearing grease,manual and automatic lubricators and accessories of lubrication.

On operating time,for optimum performance,bearing should be re-lubricated correctly.Choosing correct grease for practicing and delivery with correct amount at correct period is obligatory to take advantage of bearing life.In addition to this, lubrication method contributes to optimize bearing life.From single point or multi-point,lubricating forever with automatic lubricators provide more stable,more correct amount than manual lubrication methods and lubrication which is free of pollutants.

Basic Condition Monitoring Systems

It contains temperature,noise,speed and vibration measuring appliances.

At working time,measuring basic machine status monitoring parameters like temperature,vibration and noise is important.Possible problems are detected with these regular checks at earlier stage,prevent unplanned machine stop.As a result,maintenance plan is arranged considering producing status.In this way, workshop efficieny and productivity are increased.

Dismantling

It includes both hydraulic and mechanical puller, induction heaters and hydraulic equipment.

At some point, the bearing completes its operating life and needs to be replaced. Even if the bearing is not reused, the correct disassembly is extremely important for the life of the bearing to be replaced. First, the proper removal method and the use of tools prevent damage to other machine elements such as bearings and bearings that do not change frequently. Second, unsuitable removal techniques may pose a danger to the operator.

The post SKF Bearing Life Cycle first appeared on Sena Rulman | SKF İzmir Bayi | İzmir Rulman.

SKF Sustainability

ramazan — Mon, 05 Aug 2019 09:29:30 +0000

SKF maintenance and lubrication products family is choosed to provide maximum lifetime for bearing.Over 30 years,our first priority is presenting long life solutions for bearing to customers and optimizing machine performance.Naturally,human and machine security is first priority and too important.Our products have structure to provide human and machine security.Over the years,we used SKF bearing’s wide information and experience on improving appliance and methods for wearing and disassembling bearings.Job security is vital subject during wearing and disassembling bearings.For that reason,SKF,each one is economically designed, decreasing risk of injury,whose first priority is worker’s security,improved assembly appliance and pullers on very large series

Sometimes,bearings are disassembled for modernization and reusing purpose.In this case,in order to decrease risk of damage,choosing best suitable method and disassembling appliances is obligatory.Compared to new bearings,if you used bearing again,you provide serious financial gain.Increased bearing life also increases machine operating time.It is also useful for enviromental sustainability with material and energy-saving.When you mount bearing on any machine,required settings should be made on machine.Any axis shift is the reason of vibration and friction.It also causes to decrease bearing life and shorten machine operating time.More important case is that axis shift increases energy consumption.For that reason,in order not to meet unnecessary energy losses,we offer you to use SKF shaft and pulley axis setting systems

Most important point for optimal bearing life,qualified lubricator and using proper method of lubrication.During operating time,relubricating provides energy-saving with decreasing friction significantly.Wide lubrication products of SKF are specially formulized for different practising .One of our special lubrication in our product range is bearing grease which is biodegradable and suitable for practicing about very critical air pollution.SKF automatic lubricators are developed to forward lubricators which are used on right region,on rigth time,on right amount.In this way with only using required amount ,there is less waste with helping to protect resources.In addition to this,Result of using SKF automatic lubricators,there is no cleaner oil matter or grease outpouring matter.So, you provide less dangerous business environments

In order to detect status of machine and bearings,we offer devices which are easy to use in very wide range.Operator which is monitoring status of machine with parameters like working temperature and speed,adjust performance of machine with most accurate.As a result,This case prodives energy-saving with increasing operating time of machine.Our systems which are used for this purpose,are non-contact type and suitable for job security.Especially,this is too important for cases which machine is dangerous or hard to reach.SKF also has aim for more energy-saving and using better about limited resources with further developing of product range and solutions.This process is valid at present.Result of these studies are reflected on our products continously.

For this subject,there is a good example which is induction heaters.25 years ago,first time,SKF used induction heaters which is continously developed until now.New generaion at present SKF induction heaters decrease energy consumption up to eighty percent.This important success,sustainable product and services are good examples for our commitment.SKF plays a more important role each day for developing our work with sensitive for environment and ecosystem.This case is also repulsive for increasing our product range.

The post SKF Sustainability first appeared on Sena Rulman | SKF İzmir Bayi | İzmir Rulman.

SKF Price List and Product Catalouge

ramazan — Fri, 02 Aug 2019 13:06:30 +0000

Actual price list and product catalouge for SKF products are added to our website.In order to reach SKF product catalouge and price list,please click here.

For actual bearing price list and catalouge,please contact us with Tlf:0090-232-449 88 77.In order to use discounted price advantage for bulk purchase and special orders,please contact with us.

Bearing Price List and Product Catalouge
Sprocket Price List and Product Catalouge
Roller Chain Price List and Product Catalouge
Coupling Price List and Product Catalouge
V Pulley Price List and Product Catalouge
V Belt Price List and Product Catalouge
Spur Gear Price List and Product Catalouge
Rack Price List and Product Catalouge
Timing Belt Price List and Product Catalouge
Pillow Blocks Price List and Product Catalouge
Taper Pulley Price List and Product Catalouge
Taper Bush Price List and Product Catalouge
Adapter Sleeve Price List and Product Catalouge
Circlip Price List and Product Catalouge
Oil Seals Price List and Product Catalouge

The post SKF Price List and Product Catalouge first appeared on Sena Rulman | SKF İzmir Bayi | İzmir Rulman.